Find The Best Deals For

Paving Contractors in Michigan

SpotDif is a market comparison site that helps you find the best paving contractor in Michigan. We provide an easy way for you to compare prices and services from a variety of contractors in your area. It can be difficult to find the right paving contractor for your needs, especially if you live in a rural area like...Read more

brown and black brick wall

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Michigan FAQs

How to lay a patio with paving slabs?

Assuming you would like tips for laying a patio in Michigan, USA: The first step is to determine the size and shape of your patio. Once you have done that, you need to mark out the area with string or chalk so that you know where to lay the paving slabs. Next, you need to excavate the area to a depth of around 8 inches. Once that is done, you need to add a layer of hardcore to the base and then compact it down with a tamper. After that, you need to add a layer of sand to the base and then level it off with a straight edge. Once that is done, you can start to lay your paving slabs. To do that, you need to start at one corner and work your way out. Once you have laid all of the paving slabs, you need to brush jointing sand over the top and then compact the slabs with a plate compactor. Finally, you need to brush off any excess sand and then add sealer to the paving slabs.

How to cut paving slabs with angle grinder?

Assuming you are asking how to cut concrete or stone paving slabs with an angle grinder, the following instructions should be followed: 1. First, make sure that you have the correct type of blade for your angle grinder. If you are cutting concrete, you will need a diamond blade; if you are cutting stone, you will need a masonry blade. 2. Next, mark the line that you need to cut on the paving slab. Use a chalk line or a pencil to make a straight line. 3. To make the cut, start the angle grinder and position the blade on the line. Slowly move the blade along the line, applying pressure as needed. Be sure to keep the blade perpendicular to the surface to avoid damaging the paving slab. 4. Once the cut is complete, turn off the angle grinder and remove the blade. Inspect the cut to make sure it is straight and clean.

How long after paving can you walk on it?

The answer to this question depends on a few factors, such as the type of pavement, the weather, and the amount of traffic the pavement will be exposed to. For example, concrete pavement can take up to 28 days to fully cure, while asphalt pavement only needs around 24 hours to cool and set. However, if the weather is hot and sunny, it’s best to wait a little longer before walking on asphalt pavement, as the heat can cause the asphalt to soften and become sticky.

Is a paved driveway cheaper than concrete?

As a general rule, a poured concrete driveway is cheaper than a poured asphalt driveway. However, due to increased durability and resistance to decay, asphalt is still the preferred choice for many homeowners. As such, expect to see poured asphalt driveways becoming more and more popular.

Is asphalt the same as blacktop?

Blacktop is a slang term used to describe asphalt-based roadways.

How to clean paving slabs without a pressure washer?

Assuming you do not have access to a pressure washer, one way to clean your paving slabs is by using a garden hose with a detachable sprayer attachment. Another way is to use a stiff brush and a bucket of soapy water. First, wet the paving slabs with the hose and then scrub them with the brush. Be sure to rinse the soap off afterwards.

How soon after paving should i seal my driveway?

You should wait at least three days after paving before sealing your driveway. If it rains during that time, you should wait an additional day before sealing.

What is the cheapest way to pave?

Asphalt is the cheapest and most durable paving material. It ranges from bland to bland but is stable and can handle a lot of traffic. Asphalt is one of the most common pavements in the United States.

How much does it cost to hot top a driveway?

The average cost to hot top a driveway is $150 to $600. The cost to hot top a driveway ranges from $150 to $600 for concrete to $600 to $1200 for stone. The cost to hot top a driveway ranges from $150 to $600 to install.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account