Find The Best Deals For

Paving Contractors in Surrey

Paving contractors in Surrey, England, United Kingdom are responsible for the construction and maintenance of paved surfaces. This can include roads, sidewalks, driveways, and parking lots. Paving contractors typically work with a variety of materials, including asphalt, concrete, and stone. Paving contractors in Surrey must be licensed by the l...Read more

Paving Contractors in Surrey

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Surrey FAQs

What to ask a paving contractor?

When interviewing a paving contractor, be sure to ask about their experience and qualifications. It is also important to ask for references from previous clients. Other important questions to ask include: – What type of paving materials do they use? – How long will the job take? – What is the estimated cost of the project? – What is their warranty or guarantee policy? Be sure to ask plenty of questions and get all the information you need before making a decision.

How to remove dried cement from paving slabs?

Assuming you are referring to cement that has been spilt on paving slabs and has then dried, the best way to remove it is as follows: 1. First, try to remove as much of the dried cement as possible by chipping it away with a blunt object such as a screwdriver or a blunt knife. 2. Once you have removed as much of the cement as possible, make a paste out of water and baking soda and spread it over the remaining cement. 3. Leave the paste on for a few hours to allow it to break down the cement, then scrub the area with a stiff brush to remove the paste and the cement. 4. If the cement is still not coming off, you can try using a pressure washer on a low setting, or alternatively, you can soak the area in white vinegar for a few hours before scrubbing again.

How to remove oil from block paving uk?

There are specialised products available from hardware stores which will remove oil stains from block paving, however it is important to follow the instructions carefully. If the oil stain is fresh, it is best to cover it with an absorbent material such as sand or cat litter, and leave it for 24 hours. This will absorb the oil and make it easier to remove. To remove the oil stain, you will need to use a stiff brush and some hot, soapy water. Scrub the area thoroughly and then rinse with clean water. If the oil stain is old and stubborn, you may need to use a pressure washer or hire a professional to clean the area for you.

How much to lay sandstone paving?

As mentioned in the other answer, it really depends on the size of your patio. Assuming you have a 20ft x 20ft (6.1m x 6.1m) patio, you would need approximately 120 slabs of sandstone paving. This would cost you approximately £1,200-£1,500. To lay the paving, you would need to first dig out the area to a depth of around 6 inches (15cm). Then, you would need to put down a layer of hardcore, which is a mixture of broken bricks, concrete and stone. This needs to be levelled off and compacted. Once the hardcore is in place, you can then start to lay your sandstone slabs. These should be laid on a bed of sand, which helps to prevent them from shifting. The slabs should be tightly packed together, with a gap of around 3mm between each one. Once all the slabs are in place, you can then fill the gaps between them with mortar. This needs to be smoothed off so that it is level with the top of the slabs. Once the mortar is dry, you can then seal the paving with a suitable sealer. This will help to protect it from stains and weathering.

How to lay crazy paving on soil?

Assuming you would like tips on how to lay crazy paving on soil in Surrey, UK: The first step is to clear the area where you want to lay the paving. This means removing any grass, weeds, or other vegetation. You may also need to level the area before you begin. Next, mark out the area where you want to lay the paving. This will help you to know how much paving you need and where to lay it. Once you have marked out the area, you can begin to lay the paving. Start by putting down a layer of sand. This will help to level the area and provide a base for the paving. Next, lay the paving on top of the sand. You can do this by hand or with a machine. If you are using a machine, make sure to follow the manufacturer’s instructions. Finally, compact the paving. This will help to ensure that it is level and even. Once the paving is compacted, you can add a layer of soil on top. This will help to hold the paving in place and prevent it from moving.

What is the best weedkiller for block paving?

Assuming you are looking for a weedkiller to use on block paving in Surrey, UK, the best weedkiller to use would be one that is specifically designed for use on paving. There are many different brands and formulations of weedkiller available, so it is important to read the labels carefully to make sure you are choosing the right product for your needs. In general, the best weedkillers for block paving contain glyphosate as the active ingredient. Glyphosate is a broad-spectrum herbicide that is effective at killing a wide range of weeds. It is important to choose a weedkiller that is labelled as being safe for use on block paving, as some products may damage the paving if used incorrectly. When using any weedkiller, it is important to follow the instructions on the label carefully. This will help to ensure that the weedkiller is used safely and effectively, and will help to avoid any damage to the block paving.

How to stop weeds coming through block paving?

The best way to stop weeds from coming up through block paving is to regularly remove them by hand or with a hoe. You can also use a herbicide to prevent them from growing, but be careful not to damage the paving.

How to get oil off block paving driveway?

Assuming you are asking how to clean an oil spill from a block paving driveway, the best way to do this is to use a product specifically designed for cleaning up oil spills. You can find these products at most hardware stores. First, you will need to sweep the area to remove any loose dirt or debris. Then, you will need to apply the cleaner to the affected area and scrub it in with a brush. Be sure to follow the directions on the product label. Once you have scrubbed the area, you will need to rinse it off with water.

How to fill cracks in crazy paving?

Assuming you would like tips on how to fill cracks in Crazy Paving located in Surrey, UK: Crazy Paving is a type of stonework made up of randomly placed pieces of stone. It is usually used for paths, patios, and driveways. Over time, Crazy Paving can develop cracks. There are a few ways that you can fill cracks in Crazy Paving. One way is to use a concrete repair caulk. Concrete repair caulk can be found at most hardware stores. Simply apply the caulk to the crack using a caulk gun. Another way to fill cracks in Crazy Paving is to use a concrete patching compound. Concrete patching compounds can also be found at most hardware stores. Apply the patching compound to the crack using a putty knife. If you have larger cracks, you may need to use a concrete repair kit. Concrete repair kits can be found at most hardware stores. Follow the instructions included in the kit to repair the cracks.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account

Get in touch

Drop us a message below and one of our team will get back to you within 24 hours

Subject of enquiry