Find The Best Deals For

Paving Contractors in Suffolk

Paving contractors are responsible for the construction and maintenance of paved surfaces. In Suffolk, England, they are responsible for ensuring that the county’s roads and footpaths are in a safe and usable condition. Paving contractors typically work for local councils or private companies. Paving contracto...Read more

green plant on brown brick wall

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Suffolk FAQs

How to lay paving stones on soil?

There are a few soil types in the UK, so it is important to know your soil type before you start to lay paving stones. If your soil is mostly sand, then you will need to add a layer of hardcore before you start to lay the paving stones. This will help to stop the paving stones from sinking into the sand. If your soil is mostly clay, then you will need to add a layer of sand before you start to lay the paving stones. This will help to stop the paving stones from sinking into the clay. If your soil is mostly chalky, then you will need to add a layer of concrete before you start to lay the paving stones. This will help to stop the paving stones from sinking into the chalky soil. Once you have added the appropriate layer to your soil, you can start to lay the paving stones. You will need to use a spirit level to make sure that the paving stones are level with each other. You will also need to use a trowel to spread a layer of mortar between the paving stones. Once the paving stones are in place, you will need to use a brush to brush the jointing compound into the joints between the paving stones.

How to lay block paving patio?

Assuming you would like tips on how to lay a block paving patio in Suffolk, UK: Start by clearing the area where the patio will be located. Remove any existing grass, weeds, or other vegetation. If there is any existing paving, it will need to be removed as well. Once the area is cleared, level it off as much as possible. Next, mark out the area where the patio will be located. Use string or garden hose to outline the area. Once the area is marked out, excavate it to a depth of around 6-8 inches. Once the area is excavated, begin installing a base layer. This can be done with either gravel or concrete. If using gravel, spread it evenly and compact it down. If using concrete, mix it according to the instructions on the package and pour it into the excavated area. Once the base layer is in place, level it off and compact it down. Now it’s time to start laying the pavers. Begin at one corner of the patio and work your way out. Lay the pavers in a desired pattern, making sure to tap them down firmly as you go. Once all the pavers are in place, use a rubber mallet to tap them down even further. Finally, sweep sand over the patio and into the joints between the pavers. This will help to lock the pavers in place.

How to joint paving slabs?

There are a few different ways to joint paving slabs, but the most common method is to use a mortar mix. 1. First, you will need to clear the area where you will be working and make sure that it is level. 2. Next, you will need to mix your mortar. 3. Once the mortar is mixed, you will need to apply it to the joints between the paving slabs. 4. You can use a trowel or a putty knife to spread the mortar evenly. 5. Make sure that you do not put too much mortar on the joints, as this can cause the paving slabs to crack. 6. Once the joints are filled, you will need to smooth them out with a wet sponge. 7. Once the joints are dry, you can apply a sealant to protect them from the elements.

How to fix a gazebo to paving slabs?

If your gazebo is sitting on a lawn, it’s likely that over time the grass will start to die and the paving slabs will become uneven, leading to an unstable and unsafe gazebo. To fix this, you will need to remove the gazebo and excavate the area around the paving slabs so that they are level with the ground. Once this is done, you can then place the gazebo back on top of the slabs and screw it down into place.

How to clean sandstone paving?

The best way to clean sandstone paving is to use a stiff brush and some soapy water. If you have stubborn stains, you can use a pressure washer with a detergent designed for outdoor use. Be sure to rinse the area well afterwards to remove any soap residue.

What size rubber mallet for paving?

There is no definitive answer to this question as the size of the rubber mallet will depend on the specific paving project you are undertaking. However, as a general guide, a rubber mallet that is around 18 inches in length should be suitable for most paving projects. If you are working on a particularly large or difficult project, you may need a larger mallet, but for most purposes, an 18 inch mallet should suffice.

How to lift paving slabs?

Assuming you are talking about concrete paving slabs that are commonly used for patios and driveways, the best way to lift them is with a pry bar and a heavy duty dolly. First, use the pry bar to loosen the slab from the ground. You may need to use a sledgehammer to help remove it. Once it is loose, slide the dolly underneath and lift it up.

How to jet wash block paving?

Assuming you have a jet washer and you are wanting to know the process of jet washing block paving, the steps are as follows: 1. Sweep the block paving to remove any surface dirt or debris. 2. Set the jet washer to a low pressure setting and hold the nozzle approximately 30cm from the surface of the paving. 3. Start washing the paving in a back and forth motion, making sure to overlap each stroke. 4. Move the jet washer slowly across the paving, taking care not to miss any areas. 5. Once you have finished washing the paving, turn off the jet washer and allow the paving to dry completely.

How to fill small gaps between paving slabs?

Firstly, you will need to clean out the gaps between the paving slabs using a wire brush. Next, you will need to fill the gaps with a suitable filler. We would recommend using a quick setting concrete as this will speed up the process. Once the filler has been applied, you will need to smooth it off using a trowel. Finally, you will need to leave the filler to set for 24 hours before using the area.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account

Get in touch

Drop us a message below and one of our team will get back to you within 24 hours

Subject of enquiry