FEATURE YOUR BUSINESS ON SPOTDIF

Find The Best Deals For

Paving Contractors in Nottinghamshire

Paving contractors are responsible for the construction and maintenance of paved surfaces. This can include roads, sidewalks, driveways, and parking lots. In Nottinghamshire, England, paving contractors are regulated by the local government. Paving contractors must follow certain guidelines in order to ensure the safety of the public. Nottingham...Read more

Paving Contractors in Nottinghamshire

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Nottinghamshire FAQs

What sand do i need to lay paving slabs?

There are a few things to consider when purchasing sand for paving slabs. The type of sand will depend on the climate and the amount of traffic the area will see. A light sand is best for areas with little traffic, while a course sand is best for areas with a lot of traffic. The climate will also dictate how much sand is needed. In Nottinghamshire, a light sand is typically used for paving slabs.

How to lay paving?

Assuming you would like tips on how to lay paving in the UK: The first step is to excavate the area where the paving will be laid. This includes removing any existing turf, soil, or vegetation. The depth of the excavation will depend on the thickness of the paving slabs you are using. Once the area is excavated, you will need to compact the subsoil to create a solid foundation. This can be done with a hand-held tamper or a vibrating plate compactor. Once the subsoil is compacted, you will need to spread a layer of sand over the area. This will act as a bedding for the paving slabs and will help to prevent them from shifting or sinking over time. After the sand is spread, you can start laying the paving slabs. Begin at one end of the area and work your way towards the other. It is important to make sure that the slabs are level and even with each other. Once all of the slabs are in place, you will need to fill any joints between them with mortar or sand. This will help to prevent weeds from growing up between the slabs and will give the paving a neater appearance. Finally, you will need to sweep any excess sand or mortar off of the paving. Once this is done, your paving will be ready to use!

How to get tyre marks off block paving?

There are a few ways that you can remove tyre marks from your block paving, depending on how built up the marks are and what materials you have available. One way is to simply scrub the marks with a brush and some soapy water. If the marks are more stubborn, you can try using a power washer or a pressure washer to remove them. You can also try using a chemical cleaner designed for removing tyre marks, which you can find at most hardware stores. If the tyre marks are really built up, you may need to hire a professional to remove them for you.

How much is block paving?

Block paving is a popular choice for driveways and patios in the UK. The cost of block paving will vary depending on the materials used, the size of the area to be paved, and the labour costs involved. Generally, you can expect to pay between £30 and £50 per square metre for block paving.

How to dispose of old paving slabs?

There are a few ways to dispose of old paving slabs, depending on the condition of the slabs and whether or not you want to recycle them. The first option is to take the slabs to your local recycling centre. Most recycling centres will accept paving slabs as long as they are clean and free of any debris. To find your nearest recycling centre, you can use the Recycle Now website (recyclenow.com/local-recycling). If the paving slabs are in good condition, you could also try selling them online or at a local reclamation yard. This is a good option if you want to make some money back from your old slabs. Finally, if the slabs are in bad condition or you simply want to get rid of them for free, you can take them to your local landfill site. To find your nearest landfill site, you can use the National Landfill Sites Register (nlsr.org.uk).

How to remove cement stains from block paving?

Assuming the cement stains are from mortar droppings, the best way to remove them is as follows: 1. First, scrape away any excess cement with a blunt knife. 2. Next, make a paste of water and dish soap, and apply it to the stains. 3. Allow the paste to sit for 15-20 minutes, then scrub it off with a stiff brush. 4. If the stains are still visible, repeat steps 2-4. 5. Once the stains are gone, rinse the area with clean water.

How to take up paving slabs?

There are a few ways to take up paving slabs, but the most common method is to use a sledgehammer or a hand-held power drill. First, you will need to remove any vegetation or debris that is on top of the paving slabs. Next, use the sledgehammer or power drill to create a hole in the middle of each paving slab. Once the holes have been created, you can then use a crowbar or a similar tool to pry the paving slabs up from the ground.

How do you fill gaps in crazy paving?

The first step is to remove any loose debris or vegetation from the cracks. Next, use a wire brush to remove any loose mortar or stone. Once the cracks are clean and clear, you can begin to fill them. There are a few different ways to fill gaps in crazy paving. One option is to use a pre-mixed concrete patching compound. Another option is to mix your own concrete patching compound using Portland cement, sand, and water. Once you have your patching compound, use a putty knife or trowel to fill the cracks. Smooth the surface of the patching compound so that it is level with the rest of the paving stones. Allow the patching compound to dry completely before walking on it or moving any furniture back onto it.

How to fill between paving slabs?

This is a difficult question to answer without knowing more about the specific location and the type of paving slabs that are being used. In general, however, there are a few different ways to fill the space between paving slabs. The most common method is to use sand, which can be spread evenly between the slabs and then tamped down to create a level surface. Another option is to use a mortar mix, which can be spread between the slabs and then left to harden. This is a more permanent solution, but it can be more difficult to achieve a level surface.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account

Get in touch

Drop us a message below and one of our team will get back to you within 24 hours

Subject of enquiry