FEATURE YOUR BUSINESS ON SPOTDIF

Find The Best Deals For

Paving Contractors in Norfolk

Paving contractors in Norfolk, England, United Kingdom are responsible for the construction and maintenance of paved surfaces. This can include roads, driveways, sidewalks, and patios. Paving contractors use a variety of materials, including asphalt, concrete, and stone, to create these surfaces. In some cases, they...Read more

people standing on pedestrian lane

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Norfolk FAQs

What sand to use for laying paving slabs?

There are a few different types of sand that can be used for laying paving slabs, but the most common type is builder’s sand. This is a relatively fine sand that is easy to work with and compact. Another type of sand that can be used is coarse sand, which is slightly coarser than builder’s sand but still relatively easy to work with. The sand should be free of any large pieces of debris or rocks, as these can cause the paving slabs to shift or crack. It is also important to make sure that the sand is damp before use, as this will help to prevent the slabs from shifting once they are laid.

What is paving?

Paving is the process of laying down a hard surface, such as concrete or asphalt, to create a smooth and level surface. It is often used to create paths, sidewalks, driveways, and parking lots.

How to point paving slabs?

There are a few ways to point paving slabs, and the best method will depend on the materials you are using and the look you are going for. If you are using pre-cast concrete pavers, you will need to use a mortar mix to adhere the pavers to the ground and to each other. If you are using natural stone pavers, you can either use a mortar mix or dry-set the pavers in place. Dry-setting is a simpler method and does not require as much time or expertise, but it is not as strong as using a mortar mix. To point paving slabs using a mortar mix, start by mixing the mortar according to the manufacturer’s instructions. Then, use a trowel to apply the mortar to the joints between the pavers. Be sure to pack the mortar into the joints so that it is level with the surface of the pavers. Once the joints are filled, use a damp sponge to smooth the mortar and remove any excess. Allow the mortar to cure for the amount of time specified by the manufacturer before using the patio. To dry-set the pavers, start by spreading a layer of sand over the area where the pavers will be placed. Then, set the pavers in place, using a level to make sure they are evenly spaced. Once the pavers are in place, use a tamping tool to compact the sand around the pavers. Be sure to fill any joints between

How to lay driveway paving?

The first step is to remove any existing grass or weeds from the area where you want to lay your driveway paving. You can do this by either hand-weeding or using a herbicide. Once the area is clear, you will need to level it out. You can do this by using a shovel to remove any high spots and fill in any low spots. Next, you will need to mark out the area where you want to lay your paving. You can do this by using string or chalk to outline the area. Once you have the area marked out, you will need to excavate it to a depth of around 150mm. This will ensure that your paving is level with the surrounding ground. Once the area is excavated, you will need to lay a layer of sub-base material. This can be either gravel or mot type 1. The sub-base should be around 75mm thick and should be compacted using a vibrating plate compactor. Once the sub-base is in place, you can start to lay your paving. The paving should be laid in a staggered brickwork pattern with each brick being butted up against the one next to it. Once all of the paving is in place, you will need to compact it using a vibrating plate compactor. Finally, you will need to fill any joints between the paving with jointing compound. This will help to prevent weeds from growing up through the cracks and will

How to lay paving slabs without cement?

There are a few different ways that you can lay paving slabs without using cement. One way is to use a product called PaverSand to hold the pavers in place. This is a product that is made specifically for this purpose and can be found at most home improvement stores. Another way is to use a layer of gravel underneath the pavers. This will help to keep them in place and provide drainage.

Where to buy paving slabs?

There are many places that you can buy paving slabs, but the best place to buy them would be at a local gardening or home improvement store. If you are looking for a specific type of paving slab, you may want to check online to see if you can find a store that specializes in that type of product.

How to remove rust from porcelain paving slabs?

Firstly, you will need to identify what type of porcelain paving slabs you have. There are three main types; glazed, unglazed, and vitrified. Glazed porcelain is the most common and is fired at high temperatures, making it more durable. Unglazed porcelain is less common and is not as strong as glazed porcelain. Vitrified porcelain is the strongest type of porcelain and is made by firing the clay at even higher temperatures. Once you have identified the type of paving slabs you have, you will need to gather the following materials: -A stiff brush -A soft brush -A pumice stone -A rust remover -A hose -A bucket -A cloth If you have glazed porcelain paving slabs, begin by using the stiff brush to scrub the surface of the slab. If the rust is stubborn, you can use the pumice stone to rub it off. Once you have removed as much rust as possible, use the soft brush to scrub the surface of the slab. Finally, use the hose to rinse the slab off and remove any remaining rust. If you have unglazed porcelain paving slabs, begin by using the pumice stone to rub the surface of the slab. If the rust is stubborn, you can use the rust remover to help loosen it. Once

How to lay a paving slab path on soil?

Assuming you would like tips on how to lay a paving slab path on soil in Norfolk, UK: Firstly, you need to clear the area where you want the path to go. This means removing any grass, weeds, and large stones. You can use a spade or a rotary hoe to do this. Next, you need to mark out the area for the path. You can do this by using string or garden hose to outline the path. Once you have the area marked out, you need to excavate the soil to a depth of around 6 inches (15 cm). Make sure the sides of the excavation are level so that your paving slabs will sit evenly. Next, you need to add a layer of hardcore to the excavation. This should be around 4 inches (10 cm) deep. Hardcore is a mix of broken bricks, concrete, and stones. You can buy this from most builders’ merchants. After the hardcore, you need to add a layer of sand. This should be around 2 inches (5 cm) deep. The sand will help to level out the hardcore and provide a stable base for the paving slabs. Now you are ready to start laying the paving slabs. Begin at one end of the path and work your way along, making sure that each slab is level with the others. Use a spirit level to check that they are level as you go. Once

How to lay a shed base with paving slabs?

There are a few different ways that you can lay a shed base with paving slabs. The most common way is to lay the slabs in a grid pattern, with each slab overlapping the one next to it. This creates a strong and stable base for your shed. Another way is to lay the slabs in a herringbone pattern. This is a little more difficult to do, but it creates a very strong base. Whichever way you choose to lay your shed base, make sure that you use a good quality cement to fix the slabs in place.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account

Get in touch

Drop us a message below and one of our team will get back to you within 24 hours

Subject of enquiry