Find The Best Deals For

Paving Contractors in Dorset

Paving contractors in Dorset, England, United Kingdom are responsible for the installation and maintenance of paving systems. These professionals work with a variety of materials, including asphalt, concrete, stone, and brick. Paving contractors typically have experience in both residential and commercial settings. ...Read more

gray and black concrete floor

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Dorset FAQs

How to paving?

Assuming you would like tips on how to pave a driveway in Dorset, UK: When paving your driveway, you will first need to excavate the area to a depth of at least 150mm (6 inches), making sure that the sides are sloped to allow for drainage. Next, you will need to lay a sub-base of MOT Type 1 hardcore, which should be compacted with a whacker plate. This should be followed by a 50mm (2 inch) layer of sand, which also needs to be compacted. Now you are ready to lay your paving. There are many different types and colours of paving available, so make sure to choose the ones you like best. Once you have laid your paving, you will need to compact it with a plate compactor. Finally, you will need to fill any joints between the paving stones with jointing compound, which can be bought from most DIY stores.

What does calibrated paving mean?

Calibrated paving is a specialised form of block paving that is used to create a smooth, level surface. It is often used in areas where a high level of precision is required, such as driveways, patios and paths. The paving is laid using a specialised machine that compacts the paving as it is laid, creating a smooth, level finish.

How to lay block paving path?

Assuming you would like advice on laying a block paving path in Dorset, UK: The first step is to mark out the area where you want the path to go. Use string or chalk to mark a straight line along the edge of the area. Then, use a spade to dig out the area to a depth of around 15cm. Next, you will need to add a layer of hardcore. This is a mix of broken bricks, concrete and stone that provides a strong foundation for the paving. Once you have spread the hardcore, use a tamper to compact it down. The next step is to add a layer of sand. This should be spread over the hardcore to a depth of around 5cm. Again, use a tamper to compact the sand. Now you are ready to start laying the paving blocks. Begin at one end of the area and work towards the other. It is important to make sure that the blocks are level as you lay them. Use a spirit level to check each block as you go. Once all the blocks are in place, you will need to fill the gaps between them with mortar. Use a trowel to spread the mortar over the gaps, then use a pointed tool to push it into the gaps. Finally, brush off any excess mortar and sweep sand over the path to fill any remaining gaps.

How many paving slabs in a car?

Assuming you are talking about the average car, there would be approximately 30 paving slabs. This number can vary depending on the size and make of the car.

How to clean paving slabs without pressure washer?

Cleaning paving slabs without a pressure washer is possible, but it will take some elbow grease. You will need a stiff bristled brush, a bucket of soapy water, and a hose. First, sweep the paving slabs with the brush to remove any loose dirt or debris. Next, mix up a bucket of soapy water and scrub the paving slabs with the brush. Rinse the slabs off with the hose and let them air dry.

What to put between paving slabs?

One option is to use sand. Another option is to use a product called PaverSet. PaverSet is a powder that you mix with water to create a slurry. You then pour this slurry over the pavers and allow it to set.

How to lay block paving driveway?

Assuming you would like tips on how to lay a block paving driveway in the UK: The first step is to excavate the area to be paved, and to create a sub-base. This is a layer of hardcore which is compacted using a whacker plate. Once the sub-base is ready, a layer of sand is added and compacted using a hand tamper or vibrating plate. The next step is to lay the blocks. The most important thing here is to make sure that the blocks are level and even. Use a spirit level or string line to make sure that the blocks are laid in a straight line. Once the blocks are laid, you will need to cut some to fit around the edges. Use a block splitter or a saw for this. Once the blocks are all in place, you will need to brush sand into the joints. This will help to lock the blocks in place. Use a stiff brush for this. The final step is to compact the whole area using a vibrating plate. This will help to make sure that the blocks are firmly in place.

How do you fill large gaps in paving slabs?

There are a few ways that you can fill large gaps in paving slabs, depending on the materials that you have available and the size of the gaps. If the gaps are small, you can fill them in with mortar or concrete. You will need to mix the mortar or concrete to a fairly runny consistency, so that it can be easily poured into the gaps. Once it is in the gaps, use a trowel or other tool to level it off so that it is flush with the rest of the paving slab. If the gaps are larger, you may need to use something like expanding foam. This is a product that comes in a can, and when you spray it into the gaps, it expands and hardens, filling the space. Once it is dry, you can trim off any excess with a knife. Another option for filling larger gaps is to use pre-cast concrete slabs. These are slabs that are made in a mold and then cured. They come in a variety of sizes, so you should be able to find ones that fit your gaps well. To install them, simply set them into the gaps and then tap them down with a mallet until they are level with the rest of the paving.

How much are block paving bricks?

Block paving bricks typically range in price from £25 to £35 per square meter. However, prices can vary depending on the type of brick, the size of the brick, and the location.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account

Get in touch

Drop us a message below and one of our team will get back to you within 24 hours

Subject of enquiry