Find The Best Deals For
Paving Contractors in Devon
Paving contractors in Devon, UK offer a wide range of services to their clients. From simple repairs to full-scale installations, these professionals have the skills and experience to get the job done right. No matter what your paving needs may be, there’s a paving contractor in Devon who can help. Paving contractors in Devon offer a wide ...Read more
Let’s find the right deal for you
We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.
Compare deals across the whole market
The latest news
How do hearing aids work?
In the UK, 12 million adults have hearing loss greater than 25 decibels. That’s one in five adults who can’t […]
Installing solar panels at your home: what you need to consider
Wondering how to install solar panels at home? Solar panels (also known as photovoltaic panels) can be a great way […]
What thickness is recommended for loft insulation?
Home insulation is an important factor in keeping your home comfortable and your energy bills low. When it comes to […]
How to manage condensation on double glazing: a homeowner’s guide
If you’ve got double glazing on your windows, then you’ll know that it can help to keep your home warm […]
A guide to tinnitus: symptoms, causes and treatments
Tinnitus is the name given to describe hearing noises that are not coming from around you. When you have tinnitus, […]
6 top money-saving tips
Saving money is important for a lot of people – it creates more financial security and allows us to do […]
What are the different types of home insurance?
Most people know they need home insurance – but which policy? In this blog post, we’ll discuss the most common […]
4 tips for finding the best deals on the SpotDif price comparison website
Savvy shoppers know that comparing prices is the key to getting the best deals. But did you know there are […]
Paving Contractors in Devon FAQs
What sand cement mix for paving?
There is no definitive answer to this question as it will depend on a number of factors, including the type of paving you are wanting to lay, the sub-base that you are laying it on, the weather conditions and so on. However, as a general guide, a sand cement mix for paving should be made up of 1 part cement to 3-5 parts sand, with water added as needed to achieve the desired consistency.
What is calibrated paving?
Calibrated paving is a type of paving that uses a special machine to lay the paving stones or bricks in a very precise and level manner. This type of paving is often used for driveways, patios, and other areas where a level and even surface is desired.
How to repair block paving?
Block paving can last a long time, but eventually it will need to be repaired. There are a few different ways to repair block paving, depending on the severity of the damage. For small cracks or sunken pavers, you can use a chisel and hammer to level them out. If the damage is more extensive, you can remove and replace individual pavers. To do this, you’ll need to rent a paver splitter. For large cracks or sections of sunken pavers, you’ll need to remove and replace the entire section. To do this, you’ll need to saw through the joints between the pavers and remove the section. Then, you can level out the ground and install a new section of pavers.
How to lay paving edging?
There are a few different ways that you can lay paving edging, but the most common method is to lay it down before you lay the paving slabs. This ensures that the edging is level with the paving and provides a neat finish. To lay the paving edging, dig a trench around the perimeter of the area where the paving is to be laid. The trench should be around 50mm deep and the same width as the edging. Next, place the edging into the trench and use a hammer to tap it into place. Make sure that the edging is level with the ground before you start to lay the paving slabs. Once the edging is in place, lay the paving slabs on top, starting at one corner and working your way out. Use a spirit level to make sure that the slabs are level with each other, and use a Stanley knife to trim any slabs that are too big.
How to install paving edging?
There are a few things you need to do in order to install paving edging. First, you need to mark out the area where you want the edging to go. Next, you need to dig a trench around the perimeter of the area you marked out. The trench should be about 6 inches deep and 6 inches wide. Once the trench is dug, you need to install the edging material. There are a variety of materials you can use for this, but the most common are plastic or metal. Once the edging material is in place, you need to fill the trench with concrete. The concrete needs to be at least 2 inches deep in order to hold the edging in place. Once the concrete is in place, you need to wait for it to cure before you can use the edging.
How to relay uneven paving slabs?
There are a few ways that you can relay uneven paving slabs, depending on the severity of the unevenness. If the slabs are only slightly uneven, you can use a rubber mallet to gently tap them into place. If the unevenness is more severe, you may need to use a chisel and hammer to chisel out a bit of the mortar from underneath the slabs so that you can level them out. Once you have the slabs level, you can then go ahead and add more mortar to secure them in place.
What cement mix for paving slabs?
The most common type of cement used for paving slabs is Portland cement. This is because it is strong and durable, and can withstand the weight of vehicles. However, there are other types of cement that can be used for paving slabs, such as masonry cement or mortar cement.
How to lift and relay paving slabs?
There are a few different ways that you can lift and relay paving slabs, depending on the size and weight of the slabs that you are working with. If the slabs are small and light enough, you can simply lift them by hand and carry them to the new location. However, if the slabs are too large or too heavy to lift by hand, you will need to use a machinery such as a forklift or a crane.
How to get rid of weeds in paving?
The most effective way to get rid of weeds in paving is to use a combination of herbicide and physical removal. Herbicides There are a number of herbicides available that can be effective in killing weeds in paving. Glyphosate is a popular choice as it is relatively inexpensive and easy to use. However, it is important to read the instructions carefully and follow them closely, as glyphosate can also kill desirable plants if used incorrectly. Another option is to use a selective herbicide that will kill weeds without harming other plants. These are more expensive than glyphosate, but may be worth the investment if you have delicate plants growing nearby that you don’t want to harm. Physical Removal In addition to using herbicides, physically removing the weeds from the paving can also be effective. This can be done by hand using a trowel or other tool, or by using a power washer or pressure cooker. If you choose to remove the weeds by hand, be sure to dispose of them in a way that they won’t be able to regrow, such as by placing them in a plastic bag and putting them in the trash. Power washers and pressure cookers can be effective in killing weeds, but they can also damage paving if not used correctly. Be sure to read the instructions carefully and test on a small area first to be sure you are using the correct setting.