Find The Best Deals For

Paving Contractors in Buckinghamshire

Buckinghamshire is home to a number of paving contractors who specialize in the installation and repair of asphalt and concrete surfaces. These professionals are highly trained and experienced in all aspects of paving, from design and installation to repair and maintenance. They work closely with their clients to en...Read more

green leafed plant on white pot

Let’s find the right deal for you

We compare deals from all the major providers across the UK to find you the best possible deal. Simply answer a few questions to help us understand exactly what you’re looking for.

true Save your time by comparing quickly
true Save money by finding grants and deals
true Regularly updated for the latest offers

The latest news

Paving Contractors in Buckinghamshire FAQs

Where can i get cheap paving slabs?

There are a few ways to get cheap paving slabs. One way is to look for clearance items at local home improvement stores. Another way is to check online classifieds sites or forums for people who are selling used paving slabs. Finally, you could contact a paving contractor in your area and see if they have any leftover slabs from previous jobs that they would be willing to sell at a discount.

How to mix sand and cement for paving?

There are a few things to consider when mixing sand and cement for paving. The first is the ratio of sand to cement. A common ratio is 1 part cement to 3 parts sand. The second is the type of sand you use. coarse sand is usually best for paving. The third is the amount of water you add. Too much water will make the paving weaker, while too little will make it harder to work with. To mix the sand and cement, first add the sand to the mixer. Then add the cement on top of the sand. Add half of the water you plan to use and mix everything together. Once the water is mixed in, add the rest of the water and mix again. Let the mixture sit for a few minutes to allow the cement to fully hydrate before using it.

How to lay paving blocks?

Assuming you would like tips on how to lay paving blocks in Buckinghamshire, UK: The first step is to clear the area where the paving blocks will be laid. This means removing any existing grass, weeds, rocks, and debris. Once the area is cleared, use a garden hose or level to make sure the ground is even. Next, use a chalk line or string to mark out where the paving blocks will be laid. This will help you ensure that the paving blocks are laid in a straight line. Now it’s time to start laying the paving blocks. Begin by spreading a layer of sand over the area where the paving blocks will be laid. This will help to level out the ground and provide a stable base for the paving blocks. Once the sand is in place, start laying the paving blocks. It’s important to start at one end and work your way in a straight line. If you need to cut any of the paving blocks to fit, use a masonry saw or hammer and chisel. Once all of the paving blocks are in place, use a tamper or vibrating plate to compact the sand and paving blocks. This will help to create a stable surface. Finally, sweep any excess sand off of the paving blocks and enjoy your new patio!

How do i lay paving slabs?

There are a few things you need to take into account when laying paving slabs, such as the size and shape of your paving area, the type of paving slabs you’ve chosen, and the type of foundation you’re laying them on. If you’re paving a small area, you can lay the slabs directly on top of a bed of sand and cement. However, if you’re paving a larger area, you’ll need to lay a concrete foundation first. Once the concrete has cured, you can then lay your paving slabs on top, using either a bed of sand and cement or a layer of mortar. When it comes to choosing the right paving slabs for your project, there are a few things you need to consider. Firstly, you need to decide on the material you want your slabs to be made from. There are a variety of options available, such as concrete, stone, and brick. Each option has its own advantages and disadvantages, so it’s important to do some research to find the best option for your needs. Once you’ve decided on the material you want your slabs to be made from, you need to choose the right size and shape for your paving area. There are a variety of paving slabs available, so it’s important to measure your area and choose the right size and shape to fit. Finally, you need to choose the right type of foundation for your paving slabs. If you’re

How to clean brick paving?

To clean brick paving, you will need: -A stiff brush -A bucket of water -Detergent or soap -A garden hose 1. Sweep the paving with a stiff brush to remove any loose dirt or debris. 2. Fill a bucket with water and add detergent or soap. 3. Scrub the paving with the brush, using the soapy water to loosen any stubborn dirt. 4. Rinse the paving with a garden hose. 5. Repeat steps 2-4 if necessary.

How to.lay paving slabs?

There are a few things you need to do before you lay your paving slabs. First, you need to make sure the area you are going to lay them on is level. You can do this by using a spirit level. If the area is not level, you will need to excavate the ground until it is level. Next, you need to make sure the ground is compacted. This will help to prevent the paving slabs from sinking or becoming uneven over time. You can do this by using a hand tamper or a plate compactor. Once the ground is prepared, you can start to lay your paving slabs. Start by laying the slabs along the longest straight edge. Then, fill in the gaps between the slabs with mortar. Finally, use a jointing tool to smooth out the mortar between the paving slabs.

How to keep block paving weed free?

Assuming you are based in the UK, there are a number of ways you can keep your block paving weed free. One way is to use a chemical weedkiller. You can either buy a ready-mixed solution or a concentrated one that you mix yourself. Always follow the instructions on the label and take care when handling chemicals. Another way is to physically remove the weeds. This can be done by hand or with a weed brush. A weed brush is a tool with stiff bristles that you can use to scrub the weeds away. You can also prevent weeds from growing in the first place by using a weed barrier. A weed barrier is a material that you lay under your paving blocks that stops weeds from growing up through the cracks.

How much block paving do i need?

To calculate the amount of block paving you will need, you will first need to know the dimensions of the area you are paving. Once you have these measurements, you can use a paving calculator to determine the number of blocks you will need. For example, let’s say you are paving a rectangular area that is 10 feet wide and 20 feet long. Using a paving calculator, we can determine that you will need approximately 850 blocks to complete this project.

How do i cut paving slabs?

Assuming you would like tips on how to cut paving slabs in Buckinghamshire, UK: The first step is to score the paving slab with a chisel. You will want to make sure that you are wearing gloves and safety goggles during this process. Then, using a hammer, tap along the line that you have scored. This will help to start the cracking process. Next, place the slab on a stable surface. You will then need to apply pressure to the slab in order to snap it in half. It is important to be very careful during this step and to make sure that your fingers are not in the way of the chisel. Once you have snapped the slab in half, you can then use the chisel to clean up any rough edges.

Basic information.

please complete the information below.

1 of 1 Done Check
One last thing!

Please agree to the below so we can get your results.

Our Feedback

Your SpotDif account

Get in touch

Drop us a message below and one of our team will get back to you within 24 hours

Subject of enquiry